SUSPENSION AND DRIVETRAIN PARTS (By Manufacturer)

 

 

SRT-4 AGP Billet Steel Shift Selector BILLET STEEL SHIFT SELECTOR

If you've broken your factory shift selector, you know how much of a PITA it was to find a replacement. Unfortunately you can only purchase a replacement assembly costing nearly $400 from the dealer.

We now have a solution. This billet shift selector was designed to be a factory replacement for the stock unit, and made out of billet hardend tool steel. The factory cast piece has been proven to not withstand the high demands of today's high horsepower SRT4s. Here is the solution for all of you, available now.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Billet Steel Shift Selector

AGP-SRT-BSL

 $140.00CAD

 

SRT-4 AGP Solid Engine Mount Bushing Kit SOLID ENGINE MOUNT BUSHING KIT

Have you broken a bolt, or lost one completely because it was not torqued properly? If you have, you probably tore the bushing and lost the washer. Here's our little rebuild kit for the AGP Solid Engine Mounts.

This include two large bushings, and upper and lower washers.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Solid Engine Mount Bushing Kit

AGP-SRT-SMB

 $15.00CAD

 

SRT-4 AGP Solid Transmission Mount SOLID TRANSMISSION MOUNT

Tighten up that engine assembly even more and reduce torque steer and wheel hop. Use this solid transmission mount as a perfect addition to your solid engine mounts for the ultimate stability of your engine/trans. This is a direct replacement of the stock rubber trans mount. Powdercoated silver.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Solid Transmission Mount

AGP-SRT-TMOUNT

 $80.00CAD

 

SRT-4/PT Cruiser GT AGP Solid Engine Mounts SOLID ENGINE MOUNTS

The factory engine mounts for the SRT4/PT Cruiser GT are inadequate for even a stock car. Upgrade to the AGP Solid Mount kit and eliminate your wheel hop. This kit is absolutely necessary for a modified SRT4/PT Cruiser GT, and can improve drivability and will definitely cut down your quarter mile times. The kit includes a solid upper mount, solid lower mount, and washers for the top and bottom. Available in black and silver powdercoated finish.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Solid Engine Mounts

AGP-SRT-MOUNT

 $140.00CAD

 

 

ENGINE/TRANSMISSION MOUNTS

Direct replacement for stock motor and transmission mounts. Picture shows SRT4 first generation lower engine mount. Current lower mount does not require spacer, as the mount is designed to be a direct fit.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 Solid Engine And Transmission Mounts

AC MM 011

 $400.00CAD

 

 

 

PRO EDGE SHIFTER

The Pro Edge racing shifter was the natural evolution of the popular Edge line of shifters. Working with some of the top import racers, B&M's engineers took what they learned in the real-world racing environment and designed a professional level shifter system. By keeping the key features that has made the Edge such a success (such as counterbalanced bottom end) and incorporating a billet aluminum bearing mount (with a trick aerospace polymer spherical bearing), the Pro Edge has become the professional's choice. The CNC machined stick has also been upgraded to 303 billet stainless steel! 

* Billet 303 stainless steel stick

* Aerospace polymer bearing mounted in a billet aluminum housing

* Backed by B&M's lifetime warranty

 

Please email our sales team with your request for more information.

 

FORD VEHICLES

(NOTE: Prices do not include shipping and handling)

Contour/Cougar/Mystique

 Part Description

Part No.

Price

1998 to 2003, All Models with MTX

 Short Throw Shifter

45086

 $200.00CAD

Escort

 Part Description

Part No.

Price

1991 to 2003, All Models with MTX

 Short Throw Shifter

45071

 $135.00CAD

 

Please email our sales team with your request for more information.

 

GM VEHICLES

(NOTE: Prices do not include shipping and handling)

Chevy Cobalt

 Part Description

Part No.

Price

2005 to 2007 Cobalt SS

 Short Throw Shifter

45187

 $195.00CAD

 

Please email our sales team with your request for more information.

 

MAZDA VEHICLES

(NOTE: Prices do not include shipping and handling)

Protégé

 Part Description

Part No.

Price

1992 to 2003, All Models with MTX

 Short Throw Shifter

45071

 $135.00CAD

 

 Please email our sales team with your request for more information.

 

NISSAN VEHICLES

(NOTE: Prices do not include shipping and handling)

Sentra

 Part Description

Part No.

Price

2002 to 2006, All Models with MTX

 Short Throw Shifter

45068

 $235.00CAD

1991 to 2001, All Models with MTX

 Short Throw Shifter

45087

 $200.00CAD

 

 

Booger Racing

 

 SHIFTER BUSHINGS

These Injection molded polyurethane booger bushings are significantly stiffer than the stock bushings but are not a "solid" bushing. Provides more precise shift "feel" and more reliable shifting. Features an internal reduced diameter to "snap" into place securely on the shaft. The outside diameter of the small bushings will make for a snug fit in the cable ends to keep them securely in place. Takes about 30 minutes to install, and is the single best mod you can do to tighten up your shifter. Kits includes 4pc bushings kit, and detailed installation instructions. Works awesome with stock, mopar, and perrin SRT4 shifters. Fits the Turbo Neon SRT4 03+

 

  Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 Polyurethane Shifter Bushings

BGR-BSH

 $25.00CAD

 

 

 
FRONT STRUT BAR
 
DC Sports Front strut tower bar, will dramatically change the handling of your SRT. Stiffen up the front of the car, and reduce body roll. DC sports strut tower bar is by far the best strut tower bar out for the SRT4. They are made of durable carbon steel and come in a gloss gun metal finish.

 

  Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 Front Strut Bar

CSB1101

 $115.00CAD

 

  Please email our sales team with your request for more information.

 

GM VEHICLES

(NOTE: Prices do not include shipping and handling)

Chevy Cobalt

 Part Description

Part No.

Price

2005 to New, All Models

 Front Strut Bar

CSB2004

 $115.00CAD

 
REAR STRUT BAR
 

DC Sports Rear strut tower bar, will dramatically change the handling of your SRT. Stiffen up the rear of the car, and reduce body roll. DC sports strut tower bar is by far the best strut tower bar out for the SRT4.
 
They are made of durable carbon steel and come in a gloss gun metal finish. We recommend adding the front strut tower bar at that same time for most response.

 

  Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 Rear Strut Bar

CSB2101

 $115.00CAD

 

 

 

SPRING KITS

Advantages of the Eibach Pro-Kit:

  • Excellent ride quality - comfortable in cruising

  • Sportive handling in cornering, resulting in improved performance

  • Lowered center of gravity, increased stability

  • Enhanced appearance of vehicle

  • Manufactured according to ISO 9001 quality system as well as TÜV approved

  • 10 year product warranty

Sportline springs are designed by experienced suspension engineers and manufactured using the finest alloy spring wire available and under the same Eibach quality standards.

  • Extreme Performance

  • Race-Car Like Handling

  • Progressive Spring Design

  • Lowers vehicle 1.75" to 2.25"

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

Neon and SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 Pro Kit, 1.6" FR / 1.8" RR

2820.140

 $295.00CAD

2000 to 2005 Neon

 Pro Kit, 1.5" FR / 1.5" RR

2820.140

 $295.00CAD

2000 to 2005, All Models

Sportline Springs,

2.0" FR / 2.4" RR

4.2028

 $265.00CAD

 

Please email our sales team with your request for more information.

 

FORD VEHICLES

(NOTE: Prices do not include shipping and handling)

Escort

 Part Description

Part No.

Price

1997 to 2003, All Models

 Pro Kit, 1.2" FR / 1.0" RR

3584.140

 $295.00CAD

 

Please email our sales team with your request for more information.

 

GM VEHICLES

(NOTE: Prices do not include shipping and handling)

Chevy Cobalt

 Part Description

Part No.

Price

2005 to 2007 Cobalt SS

 Pro Kit, 0.0" FR / 0.5" RR

3899.140

 $295.00CAD

2005 to New Cobalt Except SS

 Pro Kit, 1.6" FR / 1.8" RR

3899.140

 $295.00CAD

2005 to 2007 Cobalt SS

 Sportline Springs, 1.0" FR / 1.3" RR

4.9938

 $265.00CAD

2005 to New Cobalt Except SS

 Sportline Springs, 2.0" FR / 2.5" RR

4.9938

 $265.00CAD

 

Please email our sales team with your request for more information.

 

MAZDA VEHICLES

(NOTE: Prices do not include shipping and handling)

Mazda 3

 Part Description

Part No.

Price

2004 to 2007, All Models

 Pro Kit, 1.2" FR / 1.2" RR

5545.140

 $295.00CAD

2004 to 2007, All Models