SRT4 TURBO PARTS (By Manufacturer)

 

 

All AGP Products are available, though some may not be shown on our web site.

Please email our sales team with your request for more information.

 

All AGP Turbo Kits are available. Click here for more information.

Please email our sales team with your request for more information.

 

AGP WASTEGATE ACTUATOR KIT

Do you want more performance out of your Turbo Neon SRT4? Then it is time to ditch your stock 4psi wastegate actuator for this high pressure adjustable Garrett unit. This replaces the factory installed piece, and will allow you to hold higher boost pressures to redline. No longer will your boost drop off to 11psi by 6000 RPM. We've been able to hold over 15psi, which seems to be the limit of the stock fuel system. Other benefits include reducing the amount of boost spike, as well as eliminating the oscillation that is common with light spring actuators. This kit includes a custom machined bracket to mount up to the factory points on the back of the compressor housing and is fully adjustable for preload.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Billet Wastegate (S0 to S2) Actuator

AGP-SRT-WGA

 $180.00CAD

2003 to 2005 SRT4

 AGP Billet Wastegate Stage 3 Actuator

AGP-SRT-S3-WGA

 $190.00CAD

 

AGP STOCK BLOW OFF VALVE BLOCK OFF PLATE

 

Purchase this piece separately if you already have an aftermarket external blow off valve.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Stock BOV Block Off Plate

AGP-SRT-BOP

 $22.00CAD

 

SRT-4 AGP RACE Front Mount Intercooler

AGP RACE FRONT MOUNT INTERCOOLER

 

Most of you are not ready for this. If you're serious, this 24x12x4.5 inch bar and plate core assembly is the largest, highest flowing IC core on the market for the SRT4. (Our 3.5" thick core was the largest before.) This core flows so well, we can't even measure pressure drop in this system. This kit allows the use of your stock or any aftermarket intercooler piping so installation is a very easy task.

Because of the thickness of this core, you will be advised to trim a 1/2 inch in two places on your bumper cover.

As with all AGP intercoolers for the SRT4, you will need to drill your mounting holes. We require this so that the intercooler can be positioned with all stock and aftermarket intercooler piping so installation is a very easy task, and fit is perfect.

Optional painted AGP logo in Red or Black.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Race Front Mount Intercooler

AGP-SRT-FMIC-RACE

 $770.00CAD

 

SRT-4 AGP Front Mount Intercooler Upgrade

AGP FRONT MOUNT INTERCOOLER

 

This kit requires no cutting of the bumper cover, but the bumper beam must be removed. This 24x12x3.5 inch bar and plate core assembly was the largest, highest flowing IC core on the market for the SRT4. (We have now released the AGP Race FMIC) It cools at 90-99% efficiency under almost all conditions and has less than 1psi pressure drop at 450 hp of airflow. You couldn't heat soak this if you tried. We have been able to gain 14 whp and 19 ft.lbs of torque on a bone stock SRT4. 40+ whp gain at 450 whp.

As will all AGP intercoolers for the SRT4, you will need to drill your mounting holes. We require this so that the intercooler can be positioned with all stock and aftermarket intercooler piping so installation is a very easy task, and fit is perfect.

Optional painted AGP logo in Red or Black.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Front Mount Intercooler

AGP-SRT-FMIC

 $660.00CAD

 

SRT-4 Mini FMIC Upgrade

AGP MINI FRONT MOUNT INTERCOOLER

 

So you want a FMIC upgrade for your SRT4, but you're worried about having to remove your bumper beam. Here is the answer and NOT some tube and fin radiator some other company is trying to pass off with fancy end tanks.

This 24x6x4.5" bar and plate core is the largest direct fit, under the bumper FMIC upgrade for the SRT4. This product features the same quality and craftsmanship as our standard FMIC that we've been selling now for almost two years.

If you want the best FMIC upgrade without removing your bumper beam, look no further.

Because of the thickness of this core, you will be advised to trim a 1/2 inch in two places on your bumper cover.

As will all AGP intercoolers for the SRT4, you will need to drill your mounting holes. We require this so that the intercooler can be positioned with all stock and aftermarket intercooler piping so installation is a very easy task, and fit is perfect.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Mini Front Mount Intercooler

AGP-SRT-FMIC-MINI

 $575.00CAD

 

SRT-4 AGP Screw In Temperature Sensor Kit

AGP SCREW IN TEMPERATURE SENSOR KIT

 

The factory (and all other aftermarket) Air Intake Temperature (IAT) sensor is held into the upper intercooler hose with a grommet. These sensors tend to blow out at higher than factory boost levels. The best way to fix this problem, is to purchase one of our temp sensor kits.

The new IAT sensor is designed to be a direct replacement for the factory's PCM to get an accurate reading, without blowing out and causing a big boost leak. The sensor's body utilizes a 1/4-28 thread pattern and screws into the supplied bung. Splice the two wires into your factory harness, and you're good to go.

The bung will need to welded or affixed to your existing intercooler pipe.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Screw In Temperature Sensor Kit

AGP-SRT-IAT

 $50.00CAD

 

SRT-4 AGP Fuel Return Line Kit

AGP FUEL RETURN LINE KIT

 

Introducing the only aftermarket fuel return setup that regulates the fuel pressure BEFORE the fuel rail. What does this mean? Now it doesn't matter if you have a fuel rail with a schrader valve, nor do you need a custom fuel rail. Every stock fuel rail will work with this fuel return setup!

We start off at the heart of the kit with the industry's finest 1:1 adjustable fuel pressure regulator from Aeromotive. Connect the regulator to your stock fuel feed line with our custom CNC machined billet aluminum quick disconnect fittings.

Run the supplied braided stainless steel hose back to the filler line at the tank. All necessary fittings, hose, fuel pressure gauge, regulator bracket, nuts, bolts, and hose clamps are included to make this a complete fuel return kit. We also include a billet aluminum sleeve to block off the factory regulator in the stock fuel filter.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Fuel Return Line Kit

AGP-SRT-FUEL-KIT

 $455.00CAD

 

SRT-4 RC Engineering Injector Kit

AGP RC ENGINEERING FUEL INJECTOR KIT

 

More air needs more fuel. These saturated injectors from RC Engineering are just what you need when getting serious about performance. The kit includes 4 high impedence injectors, rail spacers, and new injector clips. You will need to cut and splice the new clips into your factory harness. Also included are the billet pawn injector cover holders.

Note - you will need to control these injectors with a tuning device like the SAFCII or DTEC-FC.

Choice of 550cc (SPECIAL ORDER), 650cc (SPECIAL ORDER), and 750cc flow ratings. Rated at 43.5psi fuel pressure.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP RC Engineering Fuel Injector Kit

AGP-SRT-RC-INJ

 $485.00CAD

 

 

SRT-4 AGP Oil Accumulator

AGP OIL ACCUMULATOR

 

The SRT4 being a high horsepower turbocharged car runs a significant amount of piston-to-wall clearance. The cylinder pressure from the forced air creates more heat in turbocharged applications when compared to non-turbocharged engines, thus DCX designed a "loose" engine for added safety and longevity purposes. Unfortunately, a byproduct of an engine that allows a lot of blow-by is oil residue makes its way past the PCV system and ends up in the intake manifold, and many other places.

Oil residue in the combustion chamber of an engine is bad news, and can lead to really bad news with respect to how your engine runs. We have been testing a real solution for a while now that will actually separate the oil from the air flowing between the PCV and intake manifold. It sounds easy enough, as many people have tried to adapt simple catch cans and industrial water valves to remove the oil from the air. Those products do work OK but only separate a small amount with respect to how much oil is actually passing through the system. Enter the AGP Oil Accumulator.

Our three chamber oil separator gathers the airborn oil particles through the middle chamber. Oil is separated from the air through the filtering media and drains through a perferated aluminum plate on the bottom side of the middle chamber then accumulating in the bottom chamber. As this oil gets filtered through the middle chamber, clean air is then filtered again and exits through the top chamber. This three chamber system design provides the best protection against unwanted oil making its way to the combustion process.

The bottom of the Oil Accumulator has a threaded 1/4" NPT bung and a plug to allow the user an easy way to drain the oil.

The Oil Accumulator is completely constructed of aluminum and is highly polished to provide some extra 'bling' to your engine bay. This will fit the SRT4 perfectly and comes with hose and hose clamps for an easy installation.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 AGP Oil Accumlator

AGP-SRT-OIL-ACC

 $130.00CAD

 

 

 

STAGE III, GT3071R OR GT3076R, BALL BEARING, COMPLETE HARDWARE KIT

SRT4 Stage 3 Kit. 450 or 500HP (turbo choice dependent), GT3071R or GT3076R. Dual ball bearing kit, all hardware with new 44mm wastegate. Features 3" Garrett GT V-Band exhaust housing and Tial 44mm wastegate with V-band connections to Rev 2.0 V-band O2 housing.

**GT3076R turbo option shown in picture

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 Stage III GT3071R Turbo Kit

ATP-VSRT-008-71R

 $2440.00CAD

2003 to 2005 SRT4

 Stage III GT3076R Turbo Kit

ATP-VSRT-008-76R

 $2440.00CAD

 

GARRETT T3/T4 COMPLETE HARDWARE KIT

SRT4 turbo kit. 400HP, Garrett T3/T4 with Tial 38mm wastegate and all hardware shown.

Choice of Garrett T3/T4E 57 trim/Stage III or T3/T4E 60 trim/Stage III.

Choose .48, .63, or .82 A/R turbine housing.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 T3/T4 Turbo Kit

ATP-VSRT-011

 $1560.00CAD

 

3" STAINLESS STEEL HOUSING/TURBO DISCHARGE MODULE V2.0

 

3" stainless steel O2 housing/turbo discharge module. Version 2.0 with 1.75" wastegate return port and Tial 44mm flanged dump tube. Designed to bolt directly to the GT V-band housing on GT3071R/GT30R/GT35R turbos with longer necks. Assumes the use of the ATP cast turbo manifold and 44mm wastegate bolted to the manifold using adapter P/N ATP-FLS-039. Customers using 38mm can bolt the wastegate directly to the ATP cast manifold and build a simple 90 degree dump tube flanged for 38mm to connect to this O2 housing. This is the same kit used on the version 2.0 of our SRT4 kit utilizing the larger Tial 44mm wastegate.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 3" Stainless O2 Housing/

Turbo Discharge Module v.2.0

ATP-VSRT-010

 $230.00CAD

 

UPGRADED UPPER PRESSURE PIPE

 

The Benefits of the UPP. It replaces stock convoluted rubber piece with restrictive plastic middle section. it is a 1 piece mandrel bend with no disruption to flow. Integrated OEM style mounts for sensor and vacuum lines. Integrated modular flange for various Blow Off Valve mounts including: HKS SSQ, Greddy Type R/S, Tial Sport, TurboXS 34/RFL. Comes with vacuum hose and fittings to install and reconfigure Stock BOV. The kit comes with fittings to disable stock bypass valve integrated onto OEM Turbo.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 Pressure Pipe w/ Greddy Flange

ATP-VSRT-001GR

 $185.00CAD

2003 to 2005 SRT4

 Pressure Pipe w/ HKS Flange

ATP-VSRT-001HKS

 $185.00CAD

2003 to 2005 SRT4

 Pressure Pipe w/ Turbo XS Flange

ATP-VSRT-001TXS

 $185.00CAD

 

 

 

 U7134 Stock Vehicle Tunes:
  • 91-up Octane Performance Tune
  • Modify Factory Tune

    U7134 Specific Features:

  • Data Logging
  • Idle RPM
  • WOT Fuel 1k-3.8k / 4k-5k / 5k-7k
  • Rev Limit
  • WOT Spark 1k-3.8k / 4k-5k / 5k-7k
  • Cooling Fan adjustment
  • Speed limit
  • Boost Control
  • Read/Write time is approx 60 seconds
  • Clear codes supported
  • Multiple custom tunes.
  • All standard DiabloSport Predator features
    		•
     

    The DiabloSport U7134 Predator is engineered to raise hell on today's Dodge SRT-4. The tuner adds 30+ horsepower to the SRT-4 Neon. It also allows for tire size, spark tables, fuel tables, and much , much more!

     

    Please email our sales team with your request for more information.

     

    NOW AVAILABLE FOR 2003 to 2005 DODGE SRT4

     

    DODGE VEHICLES

    (NOTE: Prices do not include shipping and handling)

     

    SRT4

    		 Part Description

    Part No.

    Price

    2003 to 2005 SRT4

    		 Predator Tuning System

    U7134

    		 $435.00CAD

     

     

    Part Description

    Part No.

    Price
    Serial Port Interface Kit

    N/A

    		 $35.00CAD

    USB Interface Kit

    N/A

    		 $54.00CAD