ENGINE PARTS (By Manufacturer)

 

 

All ACT Products are available, but may not be shown.

Please email our sales team with your request for more information.

 

ACT SRT-4 Clutch and Flywheel Kit Street Disk 

CLUTCH AND FLYWHEEL KIT, STREET DISK (SRT4 SHOWN)

 

Some of you have probably already heard about the new ACT clutch for the SRT4. For those who don't know about the clutch, here's the skinny:

For all of you car guys that had performed clutch swaps on vehicles before the SRT, this will make a lot of sense to you. This clutch and flywheel assembly has been designed from the ground up by ACT to eliminate the flexplate and modular clutch assembly in our cars. It starts out life with a billet flywheel with ring gear that mounts up directly to the crank so you throw away the rinky dink flex plate. We've then chosen a full face street disc and sandwich'd it between the flywheel and a high performance pressure plate.

Clutch is very under-rated at a 480 ft/lbs torque capacity. (ACT has always under-rated their clutch assemblies.)
Entire flywheel, disc, and pressure plate weighs in just over 25lbs. (Stock modular assembly is 32lbs)

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 ACT Clutch and Flywheel Kit, Street Disk

N/A

 $710.00USD

 

ACT SRT-4 Clutch and Flywheel Kit Sprung 6 Puck  CLUTCH AND FLYWHEEL KIT, SPRUNG 6 PUCK (SRT4 SHOWN)

Some of you have probably already heard about the new ACT clutch for the SRT4. For those who don't know about the clutch, here's the skinny:

For all of you car guys that had performed clutch swaps on vehicles before the SRT, this will make a lot of sense to you. This clutch and flywheel assembly has been designed from the ground up by ACT to eliminate the flexplate and modular clutch assembly in our cars. It starts out life with a billet flywheel with ring gear that mounts up directly to the crank so you throw away the rinky dink flex plate. We've then chosen a sprung six puck disc and sandwich'd it between the flywheel and a high performance pressure plate. I know what you're thinking, 6 puck and street car shouldn't be in the same sentence. I would have to admit that this is probably not the clutch for EVERYONE, but there are those wanting to step it up a little and have something that will hold all the power you intend to throw at it.

Clutch is very under-rated at a 605 ft/lbs torque capacity. (ACT has always under-rated their clutch assemblies.)
Entire flywheel, disc, and pressure plate weighs in just under 25lbs. (Stock modular assembly is 32lbs)

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 ACT Clutch and Flywheel Kit, Sprung 6 Puck

N/A

 $720.00USD

 

 

Fidanza Engineering Corporation is very proud to introduce our new line of adjustable cam gears.

We saw what was available on the market and knew we could offer a better product and save our customers money.

If you desire to offer your customers the very finest cam gears available your search is over.

How Do We Do It?

The same great care that we put into the designing and machining of our flywheels get put into our cam gears.

Fidanza Adjustable Cam Gears are made from the very highest quality 6061 T6 aluminum. They are CNC machined to more exacting tolerances than even original gears.

The outside ring is coal blasted before being hard anodized. The coal blasting gives the gear a textured surface for the belt to hold on to. The hard anodizing makes the outer ring incredibly durable.

The inner ring is designed for strength, function and some darn good looks.

We use a very innovative system to fasten the two gears together. Stainless Steel studs are put through the back of the outer gear and then Loctited in place. The inner gear is then fastened with Stainless Steel nuts and lock washers. This gives the user the ability to increase the amount of torque used to tighten the fasteners with no risk of stretching to the aluminum threads.

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

Neon and SRT4

 Part Description

Part No.

Price (Each)

2003 to 2005 SRT4

 Adjustable Cam Gears (Blue, Red or Silver)

99424_

 $110.00USD

2001 to 2005 Neon 2.0 DOHC

 Adjustable Cam Gears (Blue, Red or Silver)

99420_

 $110.00USD

2000 to 2003 Neon 2.0 SOHC

 Adjustable Cam Gears (Blue, Red or Silver)

99455_

 $110.00USD

 

Please email our sales team with your request for more information.

 

FORD VEHICLES

(NOTE: Prices do not include shipping and handling)

Contour/Cougar/Mystique

 Part Description

Part No.

Price (Each)

1995 to 1997, All Models with 2.0l

Adjustable Cam Gear

(Blue, Red or Silver)

98699_

 $110.00USD

1998 to 2003, All Models with 2.0l

Adjustable Intake Cam Gear

(Blue, Red or Silver)

98699_

 $110.00USD

Escort

 Part Description

Part No.

Price (Each)

1997 to 2003, All Models with 2.0l Zetec

Adjustable Cam Gear

(Blue, Red or Silver)

98699_

 $110.00USD

 

Fidanza Flywheels is YOUR source for the highest quality and best-engineered Aluminum Flywheels available anywhere in the world!

Fidanza Flywheels are:
  • Much lighter than factory steel flywheels!
  • Made from only the highest quality materials!
  • Available for many vehicle models, with even more in production!
Fidanza Flywheels help:
  • Any street or race engine produce more usable horsepower!
  • Any street or race engine last longer due to less stress on the crankshaft and bearings!

 

Please email our sales team with your request for more information.

 

DODGE VEHICLES

(NOTE: Prices do not include shipping and handling)

Neon and SRT4

 Part Description

Part No.

Price

2003 to 2005 SRT4

 Aluminum Flywheel

194541

 $379.00USD

2001 to 2005 Neon 2.0 DOHC

 Aluminum Flywheel

194201

 $379.00USD

 

Please email our sales team with your request for more information.

 

FORD VEHICLES

(NOTE: Prices do not include shipping and handling)

Contour/Cougar/Mystique

 Part Description

Part No.

Price

1995 to 2003, All Models with 2.5l

Aluminum Flywheel

186251

 $339.00USD

1995 to 2003, All Models with 2.0l

Aluminum Flywheel

186991

 $369.00USD

Escort

 Part Description

Part No.

Price

1997 to 2003, All Models with 2.5l

Aluminum Flywheel

186201

 $369.00USD

 

Please email our sales team with your request for more information.

 

MAZDA VEHICLES

(NOTE: Prices do not include shipping and handling)

Protégé

 Part Description

Part No.

Price

2001 to 2003, All Models with 2.0l

 Aluminum Flywheel

161721

 $389.00USD

 

Please email our sales team with your request for more information.

 

NISSAN VEHICLES

(NOTE: Prices do not include shipping and handling)

Sentra

 Part Description

Part No.

Price

2002 to 2006 SER and Spec V

 Aluminum Flywheel

143291

 $495.00USD

2000 to 2001, All Models with 2.0l

 Aluminum Flywheel

143621

 $415.00USD

 

 

 

Please email our sales team with your request for more information.

 

FORD VEHICLES

(NOTE: Prices do not include shipping and handling)

Contour/Cougar/Mystique

 Part Description

Part No.

Price

1995 to 2003, All Models with 2.5l

Dual Mass Crankshaft Damper

D1S7Z6312CA

 $145.00USD

1995 to 2003, All Models with 2.5l

Crankshaft Damper Bolt

BF5RZ6A340B

 $7.00USD

 

Please email our sales team with your request for more information.

 

FORD VEHICLES

(NOTE: Prices do not include shipping and handling)

Contour/Cougar/Mystique

 Part Description

Part No.

Price

1995 to 2003, All Models with 2.5l

Baffled Oil Pan

K19P

 $189.00USD

 

 

 

 Sign up for PayPal and start accepting credit card payments instantly.

All material contained on this website is © Copyrighted 1999-2xxx. Contained material is property of CTA Automotive Consulting. and cannot be used or reproduced without written consent. Performance products are designed for competition use only and should never be used on public roads, unless so noted for such use. It is the consumers responsibility to check compliance with federal, state, and local laws before operating a modified vehicle on public roads. Performance parts manufactured or assembled by CTA Automotive Consulting are intended for competition use only and are not backed by any guarantees or warranties, and the user assumes all risks involved with installation and modification of their vehicle.