APPEARANCE PRODUCTS (By Manufacturer)

Hood Quicklift Kits

	Dodge Neon QuickLIFT for 1995-2005 model years The stock prop rod is the one item under the hood that most people find annoying. It is always either in the way or just plain difficult to use quickly and easily. Replace the stock hood prop rod with the hood QuickLIFT from Redline Tuning and end the frustation. We have spent a lot of time where it counts, designing and testing our products. Since we are crazy about quality, you can rest assure that the QuickLIFT designed for your Neon is the best out there! Special attention to detail and perfect strut placement allowed us to create a much needed mod for your Neon. Our QuickLIFT kit moves the hood lift pivots close to the hinge, freeing up valuable access to the engine bay and keeping you from the painful falling hood when you accidentally bump the prop rod from it's mount! Modify your Neon today and throw away your prop rod for good. The gas springs included in the QuickLIFT kit are custom high strength steel cylinders (black in color) with Nitride coated black extending struts and include black end fittings.   Review the pages below for details on the QuickLIFT kits - differences between standard and Elite, as well as detailed component descriptions. QuickLIFT / QuickLIFT Elite Comparison Chart! QuickLIFT FAQ & Installation Tips and Techniques Designed for: All 1995-2004 Dodge Neon models including SRT4. Not tested on aftermarket hoods.  Read our FAQ for more information. Shipping & Handling: For shipments within the continental U.S. we use FedEx. For all shipments outside the continental U.S. we use U.S.P.S. air mail. Select the desired shipping method before adding item to cart - the appropriate shipping charges will be applied. All others please contact us for pricing. Shipping charges for areas shown will be calculated at checkout.   Neons 'strutin' their stuff!
	QuickTime Movie of QuickLIFT kit in action.   Finished kit installed on a 2004 Dodge Neon Simple and secure bracket mounting. Quick-Lift Kit includes: (2) Gas charged springs (4) ball-stud brackets (4) High-strength steel rivets (4) high strength self-tapping screws (4) Locking clips Full Color Printed Manual   Required for installation: ● Power Drill ● 3/16" drill bits ● Masking Tape ● 5/16" socket and socket wrench ● Tape Measure or ruler ● Fine marker or felt tip pen ● Hammer and center punch ● Rivet gun, capable of 3/16" rivets   Download the full-color installation manual to get a head start while your order is shipped. You will notice the excellent design and detail we put into this kit to make the installation easier.   Photo taken by STLSRT.com member   Contents of the QuickLIFT. Ideal mounting locations.   2 year limited warranty for QuickLIFT, 4 years for QuickLIFT ELITE: Redline Tuning warrants for 2 years from the date of purchase all components included in the QuickLIFT and 4 years from the date of purchase for the QuickLIFT Elite kits. Kits transferred to other vehicles voids the warranty.  Our warranty for this kit is only valid if installed on the vehicle for which it was purchased. Our manual and testing are specific to the stock hoods for specified model years your QuickLIFT was designed. Feel free to contact us if you have any questions.

Please email our sales team with your request for more information.

(NOTE: Prices do not include shipping and handling)

	Ford Contour Hood QuickLIFT & QuickLIFT Elite Replace the stock hood prop rod with the hood QuickLIFT from Redline Tuning. Everyone who loves working on their car knows what a pain-in-the-neck the stock prop rod is. With a center mounting point, the prop rod is located where it is easily bumped and is always in the way when working on the engine. The Redline Tuning QuickLIFT kit has been carefully designed for a quick and painless installation, eliminating the need for the prop rod. The Quick-Lift will fit all Contour models - modify your Contour today and throw away your prop rod for good. See note below warranty for pre-98 Contour installations. The gas springs included in the QuickLIFT kit are custom high strength steel cylinders (black in color) with black extending struts and include black ball-end fittings. Review the pages below for details on the QuickLIFT kits - differences between standard and Elite, as well as detailed component descriptions. QuickLIFT / QuickLIFT Elite Comparison Chart! QuickLIFT FAQ & Installation Tips and Techniques Designed for: Contour QuickLIFT kit will work will all Contour model years, however, see note at bottom of page for details on pre-98 installations. Shipping & Handling: For shipments within the continental U.S. we use FedEx. For all shipments outside the continental U.S. we use U.S.P.S. air mail. Select the desired shipping method before adding item to cart - the appropriate shipping charges will be applied. All others please contact us for pricing. Shipping charges for areas shown will be calculated at checkout.
	Kit includes: (2) Gas charged struts (4) Ball end studs (6) Washers (2) Nuts (4) Strut locking clips Full-Color Printed Instructions     Full access to engine bay. Simple and secure strut mounting. Required for installation: ● Power Drill ● Drill bits. ● 1/2" Socket wrench and open ended wrench ● 12mm and 10mm wrench. ● Tape Measure or ruler ● Fine marker or felt tip pen The Contour kit can easily be installed within a half hour! Download the full-color installation manual (below) to get a head start while your order is shipped, or look through the manual to see the detail we put into this kit. 2 year limited warranty for QuickLIFT, 4 years for QuickLIFT ELITE: Redline Tuning warrants for 2 years from the date of purchase all components included in the QuickLIFT and 4 years from the date of purchase for the QuickLIFT Elite kits. Kits transferred to other vehicles voids the warranty.  Our warranty for this kit is only valid if installed on the vehicle for which it was purchased. Our manual and testing are specific to the stock hoods for specified model years your QuickLIFT was designed. Feel free to contact us if you have any questions.   Not all parts included are shown above Note: Pre-1998 Contours have a slight variation in the installation.  There is ridge on the fender lip where the lower ball-stud is to be mounted that isn't present on newer Contour models. This lip must be flattened or compressed in the 1/2" location where the lower ball-stud is to be mounted. This is a simple procedure, but is required for a proper installation and only on pre-98 Contours.

Please email our sales team with your request for more information.

(NOTE: Prices do not include shipping and handling)

	1998-2003 Ford Escort QuickLIFT Replace the stock hood prop rod with the hood QuickLIFT from Redline Tuning. Your Escort deserves this mod! Remove your stock prop today and install our very clean and simple QuickLIFT kit. We have designed all of the included components specifically for all models of Escort (ZX2, SE, LX) - the gas-charged struts are beautifully tucked up near the hinge and look as though they should have come from the factory. Our QuickLIFT kit frees up access to the engine bay and will allow you to work on your vehicle from all sides without reaching around your prop rod! Modify your Escort today and throw away your prop rod for good. The gas-springs included in the QuickLIFT kit are custom high strength steel cylinders (black in color) with black extending springs and include black ball-end fittings. Review the pages below for details on the QuickLIFT kits - differences between standard and Elite, as well as detailed component descriptions. QuickLIFT / QuickLIFT Elite Comparison Chart! QuickLIFT FAQ & Installation Tips and Techniques Designed for: 1998-2003 Ford Escort stock steel hoods.  Not tested on any aftermarket fiberglass or CF hoods, however, read our FAQ for answers to your common questions about this. Shipping & Handling: For shipments within the continental U.S. we use FedEx. For all shipments outside the continental U.S. we use U.S.P.S. air mail. Select the desired shipping method before adding item to cart - the appropriate shipping charges will be applied. All others please contact us for pricing. Shipping charges for areas shown will be calculated at checkout.
	High strength ball-stud ends on all brackets Clean installation.   Simple and secure bracket mounting. Quick-Lift Kit includes: (2) Gas charged springs (4) ball-stud brackets (4) High-strength rivets (4) Sheet metal screws Full Color Printed Manual   Required for installation: ● Power Drill ● 3/16" & 5/32" drill bits ● Masking Tape ● Tape Measure ● 5/16" socket and socket wrench ● Rivet gun, capable of 3/16" rivets   Download the full-color installation manual to get a head start while your order is shipped. You will notice the excellent design and detail we put into this kit to make the installation easier.   2 year limited warranty for QuickLIFT, 4 years for QuickLIFT ELITE: Redline Tuning warrants for 2 years from the date of purchase all components included in the QuickLIFT and 4 years from the date of purchase for the QuickLIFT Elite kits. Kits transferred to other vehicles voids the warranty.  Our warranty for this kit is only valid if installed on the vehicle for which it was purchased. Our manual and testing are specific to the stock hoods for specified model years your QuickLIFT was designed. Feel free to contact us if you have any questions.   Finished kit installed on a 2003 Ford Escort ZX2 with a stock steel hood.

Please email our sales team with your request for more information.

(NOTE: Prices do not include shipping and handling)

	1999-2002 Mercury Cougar Hood QuickLIFT Replace the stock hood prop rod with the hood QuickLIFT from Redline Tuning. Your Cougar deserves this mod! Remove your stock prop today and install our very clean and simple QuickLIFT kit. We have designed all of the included components specifically for the Cougar - the gas-charged struts are beautifully tucked up near the hinge and look as though they should have come from the factory. Our QuickLIFT kit frees up access to the engine bay and will allow you to work on your vehicle from all sides without reaching around your prop rod! Modify your Cougar today and throw away your prop rod for good. The gas springs included in the QuickLIFT kit are custom high strength steel tubes (black in color) with black rods and include black or silver ball-end fittings. Designed for: 1999-2002 Mercury Cougar stock steel hoods.  Also tested on Kaminari fiberglass hood. Photo to the right represents prototype QL kit, all yellow Cougar photos below show production version. Shipping & Handling: For shipments within the continental U.S. we use FedEx Ground. For all shipments outside the continental U.S. we use U.S.P.S. Air Mail. Shipping charges for areas shown will be calculated at checkout.  Email us for shipping prices areas not shown.
	High strength ball-stud ends on all brackets Clean installation.   Simple and secure bracket mounting. Quick-Lift Kit includes: (2) Gas charged springs (4) ball-stud brackets (4) High-strength rivets (4) Sheet metal screws Full Color Printed Manual   Required for installation: ● Power Drill ● 3/16" & 9/64" drill bits ● Masking Tape ● Tape Measure ● 5/16 socket and socket wrench ● Rivet gun, capable of 3/16" rivets   Download the full-color installation manual to get a head start while your order is shipped. You will notice the excellent design and detail we put into this kit to make the installation easier.   2 year limited warranty for QuickLIFT, 4 years for QuickLIFT ELITE: Redline Tuning warrants for 2 years from the date of purchase all components included in the QuickLIFT and 4 years from the date of purchase for the QuickLIFT Elite kits. Kits transferred to other vehicles voids the warranty.  Our warranty for this kit is only valid if installed on the vehicle for which it was purchased. Our manual and testing are specific to the stock hoods for specified model years your QuickLIFT was designed. Feel free to contact us if you have any questions.   Finished kit installed on a Mercury  Cougar with a stock steel hood.

Please email our sales team with your request for more information.

(NOTE: Prices do not include shipping and handling)

2004-07 Mazda 3 (5-door and Sedan) Hood QuickLIFT & QuickLIFT ELITE Replace the stock hood prop rod with the hood QuickLIFT from Redline Tuning. With such a beautiful car, the easiest modification you can make is the addition of our hood QuickLIFT. Made from the highest quality components, including: black e-coated gas springs (base QuickLIFT) or the ultimated 316L stainless steel gas springs (QuickLIFT ELITE) & high strength ball-stud brackets.  Our QuickLIFT utilizes incredible mounting locations, freeing up valuable access to the engine bay and keeping you from the painful falling hood when you accidentally bump the prop rod from it's mount! Start to lift your hood and the QuickLIFT will take over about mid-way - you will smile every time you open your hood. Modify your Mazda 3 today and throw away your prop rod for good. Review the pages below for details on the QuickLIFT kits - differences between standard and ELITE, as well as detailed component descriptions. QuickLIFT / QuickLIFT Elite Comparison Chart! QuickLIFT FAQ & Installation Tips and Techniques Designed for: 2004-05 Mazda 3 (5-door model) hoods. All aftermarket hoods supported with this design.  Even light weight carbon fiber hoods are supported with our QuickLIFT design.  Shipping & Handling: Select the desired shipping method before adding item to cart - the appropriate shipping charges will be applied at checkout. For shipments within the continental U.S. we use FedEx. For all shipments outside the continental U.S. we use U.S.P.S. air mail. All others please contact us for pricing.

QuickTime Movie of QuickLIFT kit in action.	Clear unhindered engine access.	Clean final installation.
QuickLIFT ELITE Option:         QuickLIFT ELITE - For those who want the best money can buy - QuickLIFT ELITE. Read about the details here. Includes the ultimate 316L Stainless Steel gas springs, black powder-coated brackets and the best mounting hardware.

QuickLIFT Kit includes: (2) Gas-springs (Black e-coated for base QuickLIFT) (2) Hood mounting brackets (2) Fender brackets (8) High-strength multi-grip rivets (4) Locking clips Full Color Printed Manual   Required for installation: ● Power Drill ● 3/16" or #11" drill bits ● Masking Tape ● Tape Measure or ruler ● Fine marker or felt tip pen ● Hammer and center punch ● Rivet gun     2 year limited warranty for QuickLIFT & 4 year limited warranty for QuickLIFT ELITE:       Redline Tuning warrants for 2 years from the date of purchase all components included in the QuickLIFT and 4 years from the date of purchase for the QuickLIFT Elite kits. Kits transferred to other vehicles voids the warranty.  Our warranty for this kit is only valid if installed on the vehicle for which it was purchased. Our manual and testing are specific to the stock hoods for specified model years your QuickLIFT was designed. Feel free to contact us if you have any questions.   Download the full-color installation manual (below) to get a head start while your order is shipped. You will notice the excellent design and detail we put into this kit to make the installation easier.

QuickLIFT ELITE installed on an incredible Mazda 3.

Please email our sales team with your request for more information.

(NOTE: Prices do not include shipping and handling)

	2000-2006 Nissan Sentra Hood QuickLIFT & QuickLIFT ELITE This is the first mod that should be done to your vehicle. Whether you want to just check the oil or install a new aftermarket part, you will appreciate the clean unhindered access to your engine bay. Gone will be the days of bumping the prop rod and worrying whether the hood will come crashing down on your head. Custom high pressure gas springs will allow your hood to raise from about half way unassisted. The QuickLIFT comes with multi-grip high adhesion rivets, ball-stud brackets, two high pressure gas springs, locking clips and a full color installation manual to walk you through the mounting process. Our QuickLIFT moves the hood lift pivots close to the hinge, freeing up valuable access to the engine bay and keeping you from the painful falling hood when you accidentally bump the prop rod from it's mount! Modify your vehicle today and throw away your prop rod for good. Review the pages below for details on the QuickLIFT kits - differences between standard and ELITE, as well as detailed component descriptions. QuickLIFT / QuickLIFT Elite Comparison Chart! QuickLIFT FAQ & Installation Tips and Techniques Designed for: 2000-2004 Nissan Sentra with stock hoods.  For aftermarket hood questions, first read above FAQ. Shipping & Handling: Select the desired shipping method before adding item to cart - the appropriate shipping charges will be applied at checkout. For shipments within the continental U.S. we use FedEx. For all shipments outside the continental U.S. we use U.S.P.S. air mail. All others please contact us for pricing.
	Gas spring mounting. Secure bracket mounting. Full engine bay access. QuickLIFT Options: There are a few options available when purchasing your QuickLIFT...     Black powder-coated brackets - (4) High gloss black powder-coated finish over Zinc-coated steel. Long lasting, durable and incredible quality. This is an option for most QuickLIFT kits and standard on the QuickLIFT ELITE kits. Price $10) - includes four ball-stud mounting brackets.         QuickLIFT ELITE - For those who want the best money can buy - QuickLIFT ELITE. Read about the details here. Includes the ultimate 316L Stainless Steel gas springs, black powder-coated brackets and the best mounting hardware. Price $109.95)   QuickLIFT Kit includes: (2) Gas gas-springs (Black e-coated) (2) Hood brackets (2) Fender brackets (4) High-strength multi-grip rivets (2) High adhesion rivets (4) Sheet metal screws (4) Locking clips Full Color Printed Manual   Required for installation: ● Power Drill ● 3/16" or index #11 drill bits ● Masking Tape ● Tape Measure or ruler ● Fine marker or felt tip pen ● Hammer and center punch ● Rivet gun, capable of 3/16" rivets   Aftermarket Hood (Hardware and Hood Bracket Kit): Included with your new QuickLIFT is our latest hardware and bracket designs.  Aftermarket hardware and hood bracket kit to be used if you have moved your QuickLIFT to another vehicle or purchased a different hood. Two different kinds of rivets are included and are specifically designed to hold securely onto composite materials - download the installation manual for the differences. Contact us for details. Download the full-color installation manual (below in the online manuals section) to get a head start while your order is shipped. You will notice the excellent design and detail we put into this kit to make the installation easier.   2 year limited warranty for QuickLIFT, 4 years for QuickLIFT ELITE: Redline Tuning warrants for 2 years from the date of purchase all components included in the QuickLIFT and 4 years from the date of purchase for the QuickLIFT Elite kits. Kits transferred to other vehicles voids the warranty.  Our warranty for this kit is only valid if installed on the vehicle for which it was purchased. Our manual and testing are specific to the stock hoods for specified model years your QuickLIFT was designed. Feel free to contact us if you have any questions.   Incredibly sharp Sentra SE-R Spec-V with QuickLIFT installed. Components included with the QuickLIFT.

Please email our sales team with your request for more information.

(NOTE: Prices do not include shipping and handling)